Thursday, October 13, 2022

Our First Luxury LeMans Y Code!

                                                                By: Patrick Smith


   We have a new entry to show here. This is a first for the registry. Our first Luxury LeMans Y code car! For those who aren't up on their LeMans bodies circa 1972, Pontiac did a cool thing that year. Since it was a carry over year as it was with all GM intermediates, Pontiac decided to create a new model to generate sales in the growing "luxury intermediate" category. Since 1969, GM noticed a strong uptick in well optioned A bodies selling. Since Pontiac was essentially an upgraded Chevrolet in GM management's eyes, it made sense to create an upscale LeMans model to add more sales possibly by nicking sales from Buick and Oldsmobile. 

  

This sinister gray coupe is a rare Luxury LeMans Y code two door owned by Mark Carter in Oklahoma.

   The Luxury LeMans model delivered a fancier version of the custom interior with built in reflectors on the door panels, upgraded cloth and vinyl upholstery, added woodgrain trim on the lower dash board for the wiper switch, cigar lighter and defroster switch area. The dash pad got an LLM script on the passenger side instead of a plain 'Pontiac' escutcheon. The exterior received a special three bar grille, extra wide belt moldings, LLM script for the  trunk lid, sail panels and front fenders, a chrome plated front valance for the parking lamps, extra wide trunk lid molding and fancy full hubcaps with the red lucite Pontiac center caps. A set of rear fender skirts was also provided. 

  

Some work has started since Mark bought it. After contacting me, he might change plans towards 
a more stock appearance. We'll see how it goes.

    For drive lines the Luxury LeMans offered a choice of 350 two barrel, 400 2 in two or four barrel form or a 455 4 barrel automatic as the top choice, also known as a Y Code engine or D port 455.This was a 250 hp regular fuel engine designed for pulling power and passing power instead of all out performance. What it provided in torque made up for any perceived lack of horsepower. Backed with a TH400 automatic either on the column or floor shift (console was mandatory option) and a stout series 2 12-bolt carrier packing a 3.31 ring gear.

 

His car sports a/c. power steering and brakes, underhood lamp.

    Production total for Y Code Luxury LeMans is very low. only 71 two door hardtops were made and just 19 four door hardtop LLMs. They did not make convertible LLMs. There can't be many survivors. In fact, I know of at least 2 that have been junked.  Not only did we have the luck of coming across one, it also happens to be superbly optioned with real goodies. How about a bucket seat console car with full Morrokide black vinyl for starters? Let's add a black vinyl top and Starlight Black paint as well. While we're at it, let's make it a two door hard top. That' what owner, Mark  from Oklahoma had to show me. My jaw dropped to the floor when I saw it. Starlight Black paint was special order that year on a LeMans so it's pretty rare to start with. A triple black car just pushes it through the roof.

   This one came with factory air conditioning, electric clock, pedal dress up, power steering, power disc brakes, tinted windows, remote control driver side chrome mirror, console, bucket seats in full morrokide vinyl, tilt steering, woodgrain three spoke steering wheel, under hood lamp, custom seat belts (the rare exploding buckle version) and some kind of stereo. What appears to be there now is aftermarket or possibly some later era GM unit. 1972 cars didn't use the horizontal slider switch above the dial like the 1973 Colonnade models.

    So it was an early build car last week of December from the Atlanta plant. Sold in Oklahoma where owner Mark Carter purchased it near Tulsa recently. It's a low mile survivor car with minimal rust and believed to be the original engine and tranny. It even has the fender skirts after all this time! Mark's plans are starting to change a bit now that he has a better idea what he has. He already was at work on an interior and exterior reno when he discovered this registry and my blog. So welcome, Mark and your LLM Y code hardtop! 

   *Article (C) 2022 PHS Collector Cars Y Code Registry

Friday, June 24, 2022

Factory Correct Series: Dog Dish Hubcap for 1972 LeMans and GTO

                                                                  By: Patrick Smith

 When the 1968 era body was used for one last season in 1972, you'd assume the company would re use some of the 1971 era parts to save money.Carrying a body for five years in a row had more than paid off amortization cost of tooling so there was no need to be thrifty. GM had planned to roll out the all new Colonnade body style for 1972 but a major strike in 1970 lasted so long it pushed back retooling contracts and plant redo for a whole year.

   


  Realizing this GM knew they had to carry their intermediates one more year and to freshen up the looks, invested in new front and rear end treatments, interior and minor trim. The GTO and LeMans was part of this strategy. The base wheel cover from 1970-71 was dropped and a new design with the Pontiac arrowhead prominently displayed in center with a stamped ring around it was the main feature. Note that the arrow head section is within its own raised base with a smaller ring inside. The actual surface area is not a true convex surface as seen in the 1973 style base hubcap. Instead it is slightly domed. This hubcap was a one year only design and had the part number  488630.

    This was the standard hubcap you got when you didn't order any wheel cover or mag wheel option. The PHS invoice will have no wheel code at all, it will be void of any code as the invoice only shows paid for options, not base equipment.  

    Shown above is a New Old Stock item used by Pat Brown for the restoration of his Lucerne Blue 1972 Lemans Sport 455 HO. Brown is a major enthusiast of the 455HO engine (roundport X code) and is the architect behind the correct 455HO air cleaner decal. A piece that has been sorely needed for years.

   Note also the beveled sides of the hubcap for clearing the raised sections of the steel wheel. The 1973 hubcap does not have this as the internal design is different and clears the raised steel wheel edge completely. My car had these 1972 style hubcap centers when new and probably lost them the second the aftermarket Cragar SS mags came into the speed shop. At present no one is reproducing these hubcap centers but the 1970-71 unit is being reproduced. 

    *Article by Patrick Smith  image from Pat Brown. 

       (C) 2022 PHS Collector Cars 1972 GTO LeMans Y Code 

                                                Registry

         

Friday, August 30, 2019

Product Review: Legendary Auto Interiors LeMans-GTO arm rests

                                                                      By: Patrick H Smith
 
Here we can see the three holes, under my wrist is one, bottom right is #2 with screw out, and the
third one is just above where the door handle lever goes into arm rest. It is blind so use a flashlite
to make sure you actually get the screw, Poking holes in base is real common problem.
  We do product testing of items suitable for 1971-72 era Pontiac LeMans and GTO cars. The Y Code existed only in 1972 as an identifiable engine by VIN number, but the motor existed in 1971 as well. This time out we're reviewing Legendary Auto Interiors' reproduction arm rests. These are listed as part numbers  AP68 GA and color code. The arm rests are available for Pontiac LeMans and GTO for the following years, 1968 to 1972. This is offered for Buick Skylark, Olds  Cutlass 442. Chevy Chevelle Malibu & SS as well. Our choice was black to match the original interior of the car. Finished in Madrid vinyl. The set came to $96.00 a pair in USD. By the time it crossed the border and arrived here it was well over $100. Not much I can do about the customs and dollar exchange. That's the cost of being on the wrong side of the border. Was it worth it? Well read on!
 
With base removed you can see where the holes are and note them. Third one is right
above door handle.

  First I want to talk about shipping. Legendary Auto Interiors did a good job packing the items. It was well sealed and although no damage was incurred, I can safely say if it was bruised around a bit, the insulation inside would have protected it. Basically someone would have to stand on the box to wreck these parts. Next, the actual goods. They looked great and were finished well. No damage there either or defects. The grain is spot on to the original vinyl. I was surprised at the size of the arm rests and had to go out to the car to compare them. I also looked at pictures of cars with new interiors AND vintage road tests to see if my eyes were deceiving me. Well they weren't My existing arm rests had in fact, shrunk since 1972.  The arm rest base is almost flush with the plastic arm rest holder which is bolted to the door panel. On a new car, the arm rest actually protrudes a bit outwards towards the bucket seat. Something I hadn't noticed.
 
The underside of arm rest base shows a split where previous owner rammed the screw in the wrong place. Use a
flashlight to prevent this mistake. You can but repro arm rest bases if yours are hooped.
  Installing these requires you to remove the arm rest base from the door panel. It's held on with screws. The door opening lever doesn't have to be removed to do this. The too required to remove the door opener lever is the same one you use to remove window cranks. Very cheap and useful tool to buy. I think Dorman tools even makes it. Anyway, just three Phillips screws holds the arm rest base on. The sneaky third screw is at the front of arm rest base deep inside on an angle. You'll want a long, thin shaft Phillips screwdriver and a mini flashlight to make sure you don't accidentally poke the screwdriver through the molded rubber arm rest base surround. If you do that, there'll be a nice hole in the rubber and you'll waste time spinning that screwdriver around and not removing the screw because you shot right past it! if you remove your base and you see a split or hole in the front screw location, you'll know some one's been working on it before you.
 
Underside of Legendary piece (bottom in red) and original factory unit on top. GM did their
bases underneath with metal plate, Legendary's is finished in some kind of molded hard plastic. Hole
placement is spot on.
 Remove those, lift the base away from door and hold upside down. The screws holding the arm rest to the base are exposed. Undo those and the pad falls away from the base. It's that easy. The replacement Legendary arm rest pads are excellent reproductions of the originals featuring correct grain leather finish and the holes drilled underside align right where they're supposed to on the arm rest base. You will need to firmly push the arm rest against the plastic sides to match it against the surface smoothly and not leave any gaps. As you install the screws the arm rest will want to move away from the base. Just keep pressure on it sideways and the arm rest will be flush and a seamless appearance will be assured.That's the only real tip you need to know. It's that simple and a 20 minute job with all the tools.Over all I give the Legendary Interiors arm rests a good rating for fit, finish and quality control. Time will tell on the longevity issue. I don't anticipate problems though.
 
As you can see, the Legendary Auto Interiors piece on bottom is accurate. See how worn out
my old one on top is? The passenger side had cracks!
 Tools Needed:

Dorman Window Crank Remover- (optional, use for changing out door handle, but most of the time they're still good.)

 long thin shaft screwdriver- Phillips head.

mini flashlite (for aligning that pesky top screw and keeping it from tearing hole in arm rest base rubber.)

* Article (C) 2019 Patrick H Smith, images from PHS 1972 Y Code Registry


Tuesday, February 6, 2018

Y Code Parts Dept: Rare Stereo Cassette Player Option

                                                                        By: Patrick Smith
       
The stereo cassette player option was short lived at GM in 1971. Note the tape
went on top of machine with heads up.
  When the 1972 LeMans and GTO appeared for sale, a couple of new options appeared in the ads which lured buyers. When it came to ordering some of them however, they discovered the part was made of unobtanium. That's right, some pieces like the duck tail spoiler was discontinued the first week of production. Others, like this beauty here, the stereo cassette player console, was dropped later on. A few cars got this player, but we're talking very few! Most orders were for the 8 track players.
 
Cassette door is on top and load heads down.
RPO U55:
  Offered as RPO U55 or sales order code 414, the stereo cassette player was based on the Phillips Corporation version of tape and was primarily used for recording dictation notes in offices for typing later. In the 60s, the opinion of cassette tape material was that it was inferior to the wider 4, 8 track and reel to reel recording tape medium. The idea was more surface area meant better sound quality. That was true, but changes and progress in developing the cassette medium improved the sound enough to make commercial recordings of cassette albums viable. Columbia Record Club got behind the medium by 1969 and by the early 1970s you started seeing cassettes of LPs out there with 8 tracks and reel to reel versions. They weren't very common, about as unusual as a CD release for the early 1980s era, but they did exist and it was growing fast. Being able to play a whole album side without interruption was a big plus for audio fans.

Heat sink and two capacitors out back reveals this unit was packing
an amplifier.
  So how come the stereo cassette player option vanished? That part if still a mystery. If I find out, you'll read about it here. For now, let's concentrate on the few that were made and what they are like. According to Pontiac Division's 1972 RPO Production List, only 343 cars from 1971 got these babies and none for 1972. However, the 1972 Grand Prix and Firebird models got 177 and 71 units respectively before it was dropped. I suspect that the few cars we're going to encounter with a cassette player are going to be additions from an over the counter unit or earlier  B body car from 1971. It appears to have been deleted very early in production. 71 units, by the way, translates to 0.01 percent on the Grand Prix. So if say, 20 A bodies got a cassette player, it may show up as zero percent. Zero percent doesn't necessarily mean zero units!
     
Another unit with the factory knobs present.
 Appearance and Part Numbers:  The unit is an integral black box construction with front loading cassette mechanism on top with heads down (facing you)orientation. There is a six row heat sink behind and a harmonica connector out back for the radio and speaker connections. The controls are on the front and have two  chrome and satin finish knobs, one on each end. The unit was manufactured by Delco Electronics in Kokomo, Indiana. The part number is 7937400. The Ac Delco radio product code is 1OBCT12 which broken down translated to 1971, O which isn't used by Delco to describe any GM division, B= full size B body cars, CT= cassette, integral and 12 which should mean twelfth revision but would be impossible given the brutally short production life of this component.In fact, between 2, 337 units, the revision code didn't change.More likely it refers to 12 maximum playable tracks, 6 per side. The O for division code likely referred to all car lines. Notice for instance, on the bottom of the unit shown here, a Red ink stamp "P" for Pontiac? Examining the Pontiac salesmen book reveals that option RPO U55 was available on all Pontiac models provided certain conditions were met. The conditions were; car must have automatic transmission. It wasn't available with manual transmission as the salesman's written note adds that a console must be ordered when installing the cassette player on a "finished car" with manual transmission.

The paper product label with part number and Ac Delco breakdown. Notice the red ink stamp P
for Pontiac? This cassette player was likely offered across all B body models before it was dropped.
Rarity, value: This is scarce, along the lines of a Bigfoot or Yeti sighting for an A body car. Is it valuable? That depends on how badly you want it. Since it didn't appear as an available option for ninety nine percent of 1972 GTO or LeMans cars, it won't appeal to a restorer. A B body fan will definitely want it however. Auction prices are scarce but I have seen units for sale in the $500 range. That doesn't guarantee you a playable one! As for quantity, we know from serial numbers that at least 2,337 were made before production ceased. Not common but not super rare either.Search those Bonnevilles and Catalinas.
  * Article (c) 2018 by Patrick Smith  PHS 1972 Y Code Registry

Sunday, January 28, 2018

Y Code Tech: 1972 Climate Controlled Combustion System


                                                                         By: Patrick Smith        
   Emission controls became a necessary part of the automobile since the late 1950s when smog from the Los Angeles basin became prominent. The early systems are laughably primitive now. The road draft tube found in pre 1961 cars was devised to allow engine crankcase vapors to escape via vacuum created by exposure to passing air from the bottom of the engine bay. This set up eased blowby and got the vapors out of the engine bay and passenger compartment, but added to the pollution by creating about 20 percent of hydrocarbon emissions. California State did away with road draft tubes in cars sold in that State by switching to a closed system with a tube from the crankcase to the intake manifold with a valve in between to control the flow of fumes. This was the start of the PCV valve. By 1963, the other 49 States started using PCV valves as well.

   Now on these early systems there was no way for the hydrocarbons to leave the crankcase. It was theoretically recombusted until the output was spent, burnt hydrocarbons. The exception to this was at wide open throttle when the intake manifold had no vacuum to draw pollutants into the engine. At wide open throttle, the engine breathes through the oil filler cap on the filler tube. This was changed in 1966 with a closed PCV sytem on California State cars. 49 State cars gained this set up by 1968. The closed combustion System (CCS) allowed zero hydrorcarbon gas escape. They did it by drawing the pollutants into the engine through suction in the air cleaner element.  Let's look further into the General Motors version of closed combustion system, or CCS as it was called.

The basic closed combustion  setup: At first glance, there doesn't appear to be much difference between an open PCV and closed PCV system.The main difference is the way the fresh air entrance is rigged. Fresh air enters from the air cleaner into a hose or other connection to the crankcase. The normal route is fresh air entering a PCV filter inside the air cleaner, then going into a hose to the rocker cover. This way it doesn't pass crankcase fumes into the air at wide open throttle. When operating under manifold vacuum, the air flow goes from air cleaner to rocker cover. At wide open throttle, the air flow is by crankcase pressure through the fresh air hose from rocker cover back to air cleaner. Once inside the air cleaner they are sucked into the carb for re entry.  With these closed combustion systems you will see a PCV filter at the end of the fresh air hose. Frequent loading up of the filter media tells you blow by is heavy from taking excess fumes.

Transmission Controlled Spark- 
  
The TCS system when used on Pontiacs, may differ in operation particularly with the way the
solenoid is activated. Some years the valve is energized ON, other years energized OFF. Look up the
right year to make sure it works correctly,
    In a nutshell, TCS works by having vacuum to the distributor cut on or off by a vacuum solenoid. The solenoid gets current when the ignition switch is on and normally it is fused in with the car fuse block. The solenoid is grounded at the tranny in certain gears and ungrounded in others. One trip up in diagnosing TCS is there are two types of solenoids; normal open to vacuum and normal closed to vacuum. The first one allows vacuum flow when not energized and the second one allows vacuum flow when energized. The earliest set up used normal open solenoids so it would allow vacuum advance at all times should a fuse blow or something happened to break the electrical circuit.

Top image shows you the transmission controlled spark components found in Pontiacs. The bottom image is of
the Combination Emission Control set up found only on Ventura II cars usually with Chevy engines.
  The Pontiac TCS system controls distributor vacuum by an oil pressure sensitive  transmission switch connected to a solenoid valve in the carb to distributor vacuum line.Whenever the tranny operates in other than high gear, the tranny switch and solenoid valve are both closed, shutting off vacuum to the advance unit. When the transmissions goes into high gear, oil pressure in the direct clutch circuit causes the transmission switch to open, cutting the signal and opening the solenoid valve, allowing vacuum flow to the unit. A temperature switch allows vacuum to reach the unit below 85 degrees F or above 220 degrees F. With manual transmission cars, the set up is similar but the switch is externally mounted and operated by transmission linkage position.
A close up of the CEC solenoid and position adjustment.
Combination Emission Control System CEC: 
 This set up was used on the Ventura II for 1971 instead of TCS. When the CEC solenoid is energized, the solenoid plunger moves outward against the throttle lever. This speeds up engine and allows ported spark vacuum to the advance unit.It can be energized three ways: a transmission shift into 3rd or Reverse gear, a temperature override switch at temperatures below 82 degrees F, a time delay relay allowing vacuum advance for 15 seconds after turning on ignition during temperatures above 82 degrees F. The CEC solenoid is vented to purge any vacuum that may hold the distributor advanced wen the trans is in 1st or 2nd gear. An idle stop solenoid prevents run on  by allowing the valves to close beyond normal idle position when ignition is turned off. That means two throttle positions are required; a curb idle and  emission control setting.

The 1971 Thermal Vacuum Switch  Set Up (455 HO Engines)
  The high output 455 round port engines used a thermal vacuum switch connected to a throttle actuated spark advance. This set up gives no vacuum advance at idle unless engine coolant temperature is above 230 degrees F, when full advance is applied to allow the engine to circulate coolant faster to maintain normal operating temperature.


The 1972 Pontiac CCS System: This year's CCS set up was redesigned.A new Speed Control Spark Advance operation was added by combining bits of the older TCS and CEC set ups. The new acronym for Speed Control Spark Advance is SCS.If it's a four speed manual transmission car, it will be using the older TCS system, If it's running a straight six or Chevrolet 307 V8 it will use the CEC system but without time delay relay.Vacuum advance is allowed 20 seconds after the transmission goes into high or drive gear. Advance is allowed whenever engine temperature is below 82 deg F.
   The SCS system has a vacuum advance solenoid valve and temperature sensing switch. The TCS switch is replaced with a speed control spark (SCS) switch. The SCS restricts vacuum spark advance to road speed above 38 mph. The TCS/SCS temp sending switch was moved from the top of intake manifold to the right of the rear cylinder head between plugs 6 and 8. The switch was recalibrated to allow vacuum advance at engine temps below 95 deg F and above 230 deg F. Air cleaner operation is unchanged from 1971.

Component Diagnosis: We have included a few flow charts of diagnosis for vehicles with partially imoperative systems. This may help you get the car running for emission testing or help prevent a roadside FAIL from MOE boys.
Although basic, this chart should sort out what parts needs work or replacing.
                                             
Evaporative Control System ECS:  There is a purge valve on the intake manifold besides water outlet housing which prevents canister purges until coolant temperature reaches 170 deg F. This makes the exhaust emissions better during cold starts. This set up is not used on Chevy 307 V8s or inline six cylinder cars.

Air Injection Reactor (A.I.R): Some cars due to the State they are sold in such as California, or due to a dirtier camshaft profile, need to run an air pump. The inline six engines use air pumps of the positive displacement vane type. They are belt driven and use a diverter valve, check valve and silencer. The check valve is behind the diverter valve and is a one way diagpragm designed to prevent hot exhaust gas from backing up in the hose and damaging the pump if the belt fails or hose rupture or excessive system pressure. The diverter valve releases air from system during deceleration. It is vacuum actuated.This takes care of the CCS system up to 1973. The following year incorporates a lot of changes and will be covered in a future article.
  * Article (c) 2017 by Patrick Smith, images from PHS MEDIA ARCHIVES. This originally
             appeared in expanded form on phscollectorcarworldblog April 2017. used with permission.

Thursday, January 25, 2018

PHS Y Code Registry Certificate Program is Ready to Roll...

                                                                       By: Patrick Smith


  After many months of talking, I have been able to obtain a nice Certificate of Authenticity document for the Y Code Registry. The Certificate shows that the vehicle in question is a genuine L75 equipped  GTO or LeMans model and a member of this registry. Initial set up and production of the proof document and certificate number one has been the expensive part of the process. Mailing and verification also takes time and effort. If it could be done for free, I'd do it gladly. Consider it an investment in the car. Having it in a registry and a source of authority can only benefit your ownership experience. Whether your car's ready to drive show piece or a project car, every owner gets valuable information to put these rare, big bore machines back to Day One status.

   Shown below is a copy of the certificate. This is my own car. I left the signature, date and full VIN off for protection. Your copy of course, will be set up with your full VIN and the field description matching your car. Once I confirmed the car is indeed a genuine factory built Y Code, the date is placed on the document.  About the Certificate program. This isn't a rubber stamp, cash- money deal. I need proof the car is what you say it is.If it's numbers matching, show me the engine partial VIN and transmission VIN.

  The L75 or Y Code 455 is obscure compared to the X Code round port 455. The latter had an entire performance package built around it and was quite expensive if ordered that way as a WW5 car. Not every round port was a WW5, however. There were some very basic similarities between the cars especially in automatic transmission form which allowed clone artists to fake a round port using a Y Code car. This page helps keep the two models distinct and separate as well as document thoroughly as possible, the nuances that went into building the last of the 1968-72 A body big bore Pontiacs.

  The Certificate of Authenticity is part of a program of documentation and verification of these rare cars, called The Y Code File.  It's a complete documentation process involves a few hours time, plus travel and related expenses and produces a complete package verifying what equipment the car has and what is missing and or required for complete, show ready status. The Y Code File isn't a cheap process and I don't recommend it for cars missing their original drive lines. This is more suitable for well optioned, original cars either in excellent unrestored condition or a new restoration. For most owners, a PHS 1972 Y Code Registry COA  is sufficient.

   If you believe you own a genuine Y Code car and are interested in having it entered in the registry as an authentic car, contact me at phscollectorcarworld AT gmail DOTcom
   Be sure to place an automotive topic in subject header or the post will go into the spam file. Alternatively we can be reached by snail mail at:
 30 Moultrey Crescent, Georgetown, ON L7G 4N5 Canada


 

Thursday, January 11, 2018

Y Code Parts Dept:1980s Replacement Gauges & Sender Unit Part Nos.

                                                                        By: Patrick Smith

   Those of you seeking GM original NOS (New Old Stock) parts have probably learned by now they're pretty scarce and cost a lot when they do show up.It may cheer you up to learn the Ac Delco replacement parts Division issued a catalog late in 1988 listing some replacement gauge and sender units part numbers alongside their brand new pieces for showroom Fieros, Trans Ams  and older Pontiac 6000 and J2000s. I have taken the trouble of recording these numbers for you and listing them here in case you come across some for sale online at Crag's Lust or evilBay. This way you can compare the list number against what's offered online and decide whether it'll work for you. My only warning is the Ac Delco list was active in 1988 which is  many years ago and the list wasn't updated. Some parts already were no longer in inventory such as the in dash tachometer, speedometer and hood tach assemblies. I have included their part numbers here as a reference in case you see some assemblies offered for sale.In the words of Walt Kelly, creator of Pogo, "We Promise Nothing!"
  A Word about the listings: The images can be right clicked for larger size and easier reading.
    
Either image can be right clicked for larger size and easier reading.



Notes About the PNs for Instrument Panel Part Numbers
 These were collated during the mid 1990s by Paul Zazarine and Chuck Roberts back when many of the GTO parts weren't being reproduced yet. A lot of external goodies like body panels, interior trim and engine pieces were being done but not crash stuff nor electrical goodies. It was assumed the junk car supply was stable enough to handle this so the part numbers were pulled off existing units. Some panels may have replacement revision numbers stamped there with the older original number cancelled out.
1971  Air Conditioned Instrument Panel 483517
1971 non A/C              Instrument Panel  483516
1972 Air Conditioned Instrument Panel  546619
1972 non A/C              Instrument Panel 546614
 * Early 1972 cars may have 1971 non A/C block off plates which will bear the word "Pontiac" on it. Later 1972 cars will have plain black A/C block off plates. Both types have been observed in the cars.
  
Some early build 1972 GTOs without air had instrument panels with the older 1971 style
"Pontiac" script block off plate. Most 1972 block off plates were plain black. This car was built in December
of 1971. A reproduction instrument panel was installed after gauge clean up and is waiting for the rosewood vinyl transfer.
1971 Instrument Panels used a vinyl film transfer of Castillian Leather. 1972 Instrument panels had vinyl film transfers of Brazilian Rosewood. Both are available as reproductions as are the instrument panels.

Hood & Instrument Cluster Tachometer Accessory #       and Part Numbers:
1971 Hood Tach                                           989919                           pn 5657094 
1971 Inst Cluster Tach                                 na                                   pn 5657064
1972 Hood Tach                                           989919                           na
1972 Inst Cluster Tach                                 na                                   pn 5657922
Note: In 1972 Pontiac stopped installation of hood tachs at the factory. The hood tachs sold were by the dealer and installed either by the dealer or by some aftermarket installer. This is why there is no part number for the 1972 hood tach. Likewise instrument cluster tachs were part of a 3 pod gauge assembly as shown above in the Ac Delco gauge listings and not sold separately.

UPC Code U30 rally gauge cluster with clock order code 714
UPC COde U15 rally gauge cluster with tach order code 721
 *Article (c) 2018 by Patrick Smith / PHS 1972 Y LeMans & GTO Y Code Registry